Flat Roofing

Comprehensive Range

Comprehensive range of flat roofing materials

We supply a comprehensive range of flat roofing materials, including O.S.B, O.S.B T&G decking boards, Roll&Pour Felts and Bitumen, Bailey and Icopal Torch-On Felt Systems, Cromar Pro GRP and Cure-It Fibre Glass, Enviroflex Solutions, Insulation and much more.

  • 100% Satisfaction Guarantee
  • Highly Professional Staff
  • Professional and Qualified

Flat roofing supplies at Brian Gow Roofing Supplies cover every layer of a flat roof, from the deck up to the weatherproof finish. We stock OSB decking, torch-on felt systems, GRP fibreglass kits, insulation and the fixings that go with them, ready to collect from any of our four depots or delivered across the South East. As an independent family merchant established in 1996, we sell to roofing contractors and homeowners on the same terms.

What we stock for flat roofs

We hold materials for both warm and cold flat-roof build-ups, so you can specify a full system from one supplier rather than chasing parts from several yards. In a warm-roof build-up the insulation sits above the deck, under the weatherproof layer. In a cold roof the insulation goes between the joists below the deck. We carry the boards, membranes and fixings for either approach. Our main stock-holding depot at Scaynes Hill near Haywards Heath carries the deepest range, and the other branches order in quickly when needed.

Decking

  • OSB decking boards
  • OSB tongue-and-groove decking boards for a tighter, better-supported deck

Felt and bitumen systems

  • Roll-and-pour felts and bitumen for traditional built-up flat roofs
  • Bailey and Icopal torch-on felt systems, including underlays and capsheets

GRP fibreglass systems

For a jointless, cold-applied finish we stock Cromar Pro GRP and Cure-It fibreglass systems, along with the resins, matting, trims and topcoats to complete the roof. If you are weighing up fibreglass against felt, our guide on GRP fibreglass flat roofing explained walks through how the system is built up.

Insulation and other layers

  • Insulation boards for warm-roof build-ups
  • Enviroflex solutions
  • Adhesives, primers, trims and fixings to finish the roof

Choosing a flat roof system

SystemTypical useFinish
Roll-and-pour bitumen feltTraditional built-up flat roofs, garages and extensionsMulti-layer, hot-applied
Torch-on felt (Bailey, Icopal)Domestic and commercial flat roofsBonded capsheet
GRP fibreglass (Cromar Pro, Cure-It)New decks needing a jointless, cold finishSeam-free glass-reinforced layer

Not sure which materials suit your job? Bring your measurements or your plans into a depot and the counter team will help you put a materials list together. If you are buying for a whole roof, it pays to price the deck, insulation and weatherproof layer at the same time so nothing holds up the job on site.

Trade and homeowner supply across the South East

We have supplied roofing materials from West Sussex since 1996 and cover Kent, Surrey and Sussex. Order and collect from your nearest branch, or ask about delivery across the South East. Contractors running several jobs and homeowners re-covering a single garage roof are both welcome at the counter, and you get the same advice either way. We also run a lead cutting service if your flat-roof detailing calls for dressed lead around upstands and abutments.

To find opening times and contact numbers, see find a branch, or read more about our roofing supplies in Haywards Heath. For a materials price on a full flat-roof build-up, get a quote or call your local depot.

Frequently asked questions

Do you sell flat roofing materials to homeowners or only to trade?

Both. We are a merchant, not a contractor, so we supply flat roofing materials to roofing contractors and to homeowners doing their own work, on the same terms.

Can I collect, or do you deliver?

You can collect from any of our four depots at Burgess Hill, Scaynes Hill near Haywards Heath, Hailsham or Upper Hartfield. We also deliver across the South East. Scaynes Hill is our main stock-holding depot and carries the widest range.

Should I use felt or GRP fibreglass?

Both make a sound flat roof. Torch-on and roll-and-pour felt suit traditional built-up roofs, while GRP gives a jointless cold-applied finish that works well on new decks. Our GRP guide explains the build-up, and the counter team can talk it through for your roof.

Do you cut lead?

Yes. We offer a lead cutting service, so you can buy lead cut to the sizes you need for flashings, upstands and abutment details on a flat roof.